Starburst Metal Push Buckle Retractable Shoulder Belt

Starburst Retractable Shoulder Belt

Alternative Views:

Part # JUS103** Bucket Seat
Part # JUS163** Bench Seat
**Specify Color

Seat Belt Colors & Availability

Black, Ivory, Gray, Charcoal, Tan, Red, Berry, Maroon, Red Wine, Taupe, Brown, Copper, Lt. Turquoise, Lt. Tan, Dk. Green, and Military Green are in stock and ship within 1 business day.
All other colors are Special Order and ship within 3-5 business days.
Special order colors are not returnable, so if you are unsure of the color Click here to request a sample.
Black, Tan, Red, Berry, Taupe, Med. Blue, Navy, Maroon, and Lt. Turquoise have matching plastic parts. All other colors have plastic color noted on swatch.

Price: $119.95 Per Person

Style

Click to view another Seat Style

Seat Style*:

Color

Click to view another Color

Quantity:

Description

Technical Specs

How To Install

What's old is new again! The retro styling of our latest line of seat belts brings back the 60's and 70's with its Starburst push button and satin metal buckle. Available in bench or bucket seat style in your choice of 28 colors sure to match any interior. Of course the Starburst seat belts meet or exceed FMVSS 209 & 302 safety standards.

Features

Emergency Locking Automatic Retractor

Available with 20" Floppy Arm for Bench Seat or 13" Rigid Arm for Bucket Seat
1-7/8" wide seat belt webbing

Includes Heavy Duty Installation hardware and Instructions

Matching Plastic Parts unless Noted on Color Swatch
Sold individually and mounts on drivers or passenger side
Made and tested in the USA
Matching lap belts are available below

If your in the habit of using the shoulder harness in your everyday car or truck, you should be in your street rod too! This install will show how easy it is to install a 3 point shoulder belt in a 1935 - 1940 Ford car.

We start by removing the seat, interior upholstery, and anything else that may be in the way for the installation. You may not need to do this, but it does make it easier.

Next feed a piece of string down the pillar through the hole that is located about halfway up the quarter window.

These are the custom designed mounts that will be installed in the pillar to mount the shoulder point.

Feed the lower end of the string through the hole at the top of the mount and tie a knot to form a loop.

Pull the string up through the hole until the threaded hole in the mount is aligned with the hole in the pillar and install the shoulder bolt to hold it in place.

Drill through the pillar and into the mount so you can install 2 small screws to hold the mount in place.

Here is the B-pillar mount installed.

Now bolt the shoulder point in place so you can lay out the floor mounting point.

Since this car already had lap belts in it, we used those mounting points on the floor to attach the retractor mechanism.

Next put the opposite end of the belt on the bolt and tighten in place.

Remove the top mount and layout upholstery to modify it for the top mount. Re-assemble with the upholstery in place and install plastic covers.

Now install the inboard soft arms. If your car didn't have belts in it, you will need to put the seat back in to lay these out. Always be sure to check below the car to be sure there are no obstructions under the floor pan.

Accessories for this product...

Starburst Lap Belt

Seat Belt Bolt Covers

Price: $24.95 Per Person

Price: $15.00 Per Pair

Browse for more products in the same category as this item:

Seat Belts > 3 Point Lap & Shoulder Seat Belts
Seat Belts > 3 Point Lap & Shoulder Seat Belts > Starburst Push Button