 |
Marque Style Backplates are made from billet aluminum with a brushed finish to compliment the Marque Armrest. They work well as a template when installing Marque armrests. Backing plates are machined with 2 generic power window switch holes on driver side and 1 generic power window switch on passenger side.
Features
- Three 1/4" open slots to allow upholstery to show through
- 4-1/2" high at tallest point, 3-3/4" in center, 17" long
- Pre-cut with 2 generic power window switch holes on driver side and 1 on passenger side - 11/16" wide x 1-7/16" high
- Sold in pairs
- Machined from billet aluminum
- 4-1/2" high at tallest point, 3-3/4" in center, 17" long
- Pre-cut with 2 generic power window switch holes on driver side and 1 on passenger side - 11/16" wide x 1-7/16" high
|
|
|