Juliano's
How-to Install Guide Style LED Park & Turn Style Lights
for your 1935-1936 Ford Car

[ Click on images below for a larger version. ]

Step 1
Mark top center of bucket.
Mark top center of bucket.
Step 2
Mark rear of bucket.
Mark rear of bucket.
Step 3
Connect front and back lines.
Connect front and back lines.
Step 4
Measure back 1/4 inch from edge of bucket.
Measure back 1/4 inch from
edge of bucket.
Step 5
Center light on line 1/4 inch back from front edge and trace.
Center light on line 1/4 inch back
from front edge and trace.
Step 6
Mark hole for screw 2 1/4 inch from front edge of traced line.
Mark hole for screw 2 1/4 inch
from front edge of traced line.
Step 7
Mark hole for wires.
Mark hole for wires.
Step 8
Center punch both marks.
Center punch both marks.
Step 9
Drill a 7/32 inch hole for the screw and a 5/16 inch hole for the wires.
Drill a 7/32 inch hole for the screw and
a 5/16 inch hole for the wires.
Step 10
Insert grommet in 5/16 inch hole.
Insert grommet in 5/16 inch hole.
Step 11
Feed wires through grommet.
Feed wires through grommet.
Step 11
Install screw and center marker light on bucket before tightening.
Install screw and center marker light on bucket before tightening.

Wiring Details
White Wire = Ground
Black Wire = Running Lights
Red Wire = Turn Signals