Replacing factory 3-Point seat belts in a 1983–1993 Mustang Convertible.

Step 1:
Juliano’s Universal 3-Point seat belt kit installed in a 1983 – 1993 Mustang Convertible.

Step 2:
Start by removing the interior plastic covers and the original seat belt. 

Step 3:
This is our seat belt kit with the custom designed bracket it mount the retractor.

Step 4:
The custom bracket is installed using the 3 bolts that secure the convertible top mechanism.

Step 5:
Next the retractor is bolted in place using the included hardware.

Step 6:
The opposite end of the belt is attached to the original mounting point on the inside of the rocker behind the seat using the original bolt.

Step 7:
Here is the retractor portion of the install complete.

Step 8:
Next slide the inboard arm into your original plastic sleeve. Bolt it back in the original spot and you are good to go.

Step 9:
Be safe and buckle up!