|
Step 1:
Juliano’s Universal 3-Point seat belt kit installed in a 1990 – 1993 Mustang Convertible.
|
|
Step 2:
Start by removing the interior plastic covers and the original seat belt.
|
|
Step 3:
This is our seat belt kit with the custom designed bracket it mount the retractor.
|
|
Step 4:
The custom bracket is installed using the 3 bolts that secure the convertible top mechanism.
|
|
Step 5:
Next the retractor is bolted in place using the included hardware.
|
|
Step 6:
The opposite end of the belt is attached to the original mounting point on the inside of the rocker behind the seat using the original bolt.
|
|
Step 7:
Here is the retractor portion of the install complete.
|
|
Step 8:
Next slide the inboard arm into your original plastic sleeve. Bolt it back in the original spot and you are good to go.
|
|
Step 9:
Be safe and buckle up!
|
