U-Cut-To-Fit Speedometer Cable Kits
Lokar has recently changed their manufacturer part numbers
and descriptions. Please call for item updates and pricing.
|
|
Premium housing designed with a specially extruded liner for extended life of the cable and machined aluminum fittings. Inner cable and outer housing can be cut-to-fit. Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included) Lokar Speedometer Cables are designed to work with any cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO,ect.) or factory speedometer with a 5/8 - 18 male thread at the speedo. Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chryslet applications. For Ford applications, the gear adapter is supplied in the Lokar kit. Customer must supply the speedo gear retianer clip. All Lokar Speedometer Cables are seven feet long and designed to be cut to fit. Additional length cable in black or stainless housing is available upon request for an additional charge. Speedometer cables for some early Ford speedos are available by special order. These speedometers must have a 3/4 x 20 female thread at the speedometer. |
|
|
Part No.
|
Description
|
|
Adjustable-Level Self-Locking Hood Prop |
||
|
|
Constructed of high quality aluminum and stainless steel, this Adjustable-Level Hood Prop will offer great looks, as well as functionality to your ride. When the hood is raised, the Hood Prop will automatically lock itself into position. This eliminates the need for two hands when opening your hood. A quick release allows the hood to be opened to its max for easy engine access. We offer two versions of the Hood Prop, three and six level. This will allow the hood to be set at various levels without any unsightly objects holding it up. It will allow the hood to be set at various levels without any unsightly objects holding it up. It also works great for cooling your engine in the staging lanes! Each level of the six-level prop increases the opening of the hood by approximately 6 inches. Each level of the three-level prop increases the opening of the hood by approximately 12 inches. |
|
|
Part No. |
Description Universal 3 level Hood Prop Polished |
|
Anchor-Tight® Headlight Braid
|
|
No, this is not just another headlightconduit! It is Lokar's design technology for U-Cut-to-Fit, non kinking stainless steel headlight braid. Designed with threaded steel stud, insuring that you won't experience any of the typical separation between braid and fitting that shows unsightly wires our in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit complete with two 12" flexible braided stainless steel Teflon lined housings, threaded STEEL studs, aluminum fittings, aluminum frill shell washers and headlight wire. |
|
|
Part No.
|
Description
|
|
U-Cut-to-Fit Cruise Control
Cables |
||
|
|
Lokar Cruise Control Cable is for use with "Rostra" Control Kits. Kit includes 4' stainless outer housing designed with a specially extruded liner for extended life of the cable and 5' of stainless inner wire, which replaces black plastic cable in Rostra Kits. Cables are "U-Cut-to-Fit" inside and outside of firewall. All aluminum fittings, stainless hold down clip and mounting bracket. Mout cable to carburetor with Lokar's Stainless Carburetor Bracket and Return Springs, Part No. SRK-4000. |
|
|
Part No.
|
Description
|
|
Call to place order
Order Line- 1-800-300-1932
Tech Line- (860) 872-1932
Lokar has recently changed their manufacturer part numbers
and descriptions. Please call for item updates and pricing.
- Catalog Index -
Juliano's Hot Rod Parts & Interior Products
www.Julianos.com