67-72 Chevy Truck 3 Point Seat Belt Installation

67-72 Chevy Truck 3 Point Seat Belt How-to
3-Points
  for 67-72 Chevy Truck
If you own a 67 thru 72 Chevy pick up, there is a good chance the belts are not working. Wether it is a broken retractor, damaged webbing or anything else, it is a good idea to replace them. This is why Julianos has come out with a kit just for these trucks. Here is a step by step installation on a 67 step side.


Here is a picture of the complete kit that we will be installing in the truck. As you can see, it comes with all the hardware that you will need in the installation.

Step 1:
The shoulder part of the three point belt will bolt in te hole that your old belts bolted to. Just bolt on the new belt.
Step 2:
The shoulder portion of the belt is all bolted in.

Step 3:
Here we have set the anchor plate on the floor marking the hole that we will have to drill. The plate is just put there to mark, once the hole is drilled the plate will bolt to the bottom of the floor.

Step 4:
Now that we marked and drilled the hole for the L bracket and retractor we can bolt it all in.

Step 5:
Make sure to bolt the other end (black oval shaped bracket) to the L bracket as well. Of course it will be in the car at the time.

Step 6:
It is time now to bolt in the fixed portion of the belt. Just like the shoulder part of the belt we are using the existing mounts.

Step 7:
The fixed part is all bolted in.

You have successfully installed seat belts in your car! Now you can take the whole family out and feel safe about it.